logo
見つかりました 644 試験結果 "

natural rubber marine boat fenders

"
品質 2 年間の保証 海上ゴムフェンダー ヨコハマ パネウマティックゴムフェンダー 工場

2 年間の保証 海上ゴムフェンダー ヨコハマ パネウマティックゴムフェンダー

Inflatable rubber fender introduction Inflatable fenders are widely used in large ships, yachts, ocean platforms, and harbor terminals. It uses compressed air as a buffer medium to absorb the impact energy of the ship. Therefore, compared with the general compressed rubber fender, it has large energy absorption, small reaction force, large contact area with the ship, and small unit surface pressure acting on the ship. , The performance is not reduced when tilted and

品質 オーダーメイドサイズ 横浜 パネウマティックフェンダー ボート ゴムフェンダー 工場

オーダーメイドサイズ 横浜 パネウマティックフェンダー ボート ゴムフェンダー

Marine Fender ISO 9001 Yokohama Fenders 1. Pneumatic Rubber Fender Introduction 1 Outer rubber The outer rubber layers that covers the outside of fender protects the cord layers and the inner rubber from abrasion and other external forces. This compound has sufficient tensile and tear strength to withstand any weather condition and hard usage. Standard color is black, but other colors are available on request. 2 Inner rubber The liner of a rubber membrane seals the pressurize

品質 ISO17357 50Kpa 80Kpa の内圧を持つ空気性ゴムフェンダー 工場

ISO17357 50Kpa 80Kpa の内圧を持つ空気性ゴムフェンダー

ISO17357 Certified Marine Pneumatic Rubber Fender Highly reliable marine floating fender designed for superior vessel and dock protection during berthing operations. Manufactured from high-quality natural rubber for durability in demanding marine environments. Key Features Product Name: Pneumatic Rubber Fender Fender Types: Net Type Excellent Weather Resistance Inner Pressure Options: 50Kpa, 80Kpa Diameter Range: 0.5m to 4.5m BV Certified Fender ISO17357 Standard Compliant

品質 直径0.4M 4.5M 船舶用ゴムエアバッグ DNV 耐久性のある安全装置 工場

直径0.4M 4.5M 船舶用ゴムエアバッグ DNV 耐久性のある安全装置

Features of our Pneumatic Floating Rubber Fender Protection Boats Ships Marine Supplies: Fully compliant with ISO 17357 standard, manufacture with mold, difference with traditional hand-make product. Diameters ranging from 300 mm to 4500 mm and length ranging from 500 mm to 1200 mm Standard colors gray and black Constructed with an inner rubber layer, reinforcing cord layers and outer rubber layer Comprehensively tested for material and hydrostatic pressure irregularities

品質 50KPa/80Kpa ISO 17357はフェンダーの横浜空気のゴム製 タイプを証明した 工場

50KPa/80Kpa ISO 17357はフェンダーの横浜空気のゴム製 タイプを証明した

Pneumatic rubber fender with tire sheath type Tyre To Ship Protection 50KPa Or 80Kpa 1. Pneumatic rubber fender introduction In the modern shipping industry, in order to allow ships to release the kinetic energy of the ship in a controlled manner when docking or berthing alongside two ships, so as to avoid damage to the ship or dock, a ship fender system (referred to as fender for short) is generally arranged on the dock or ship. Side system), to realize the orderly release

品質 海洋の重い持ち上がるエアバッグはドック進水の持ち上がる船および海洋のエアバッグを乾燥する 工場

海洋の重い持ち上がるエアバッグはドック進水の持ち上がる船および海洋のエアバッグを乾燥する

Ship Launching Inflatable Airbag According to CB/T 3795-1996, the Ship Launching Inflatable Airbag should meet the following requirements. Rubber airbag technology for inflatable boats According to CB/T 3795-1996, the Ship Launching Inflatable Airbag should meet the following requirements. 1. Dimensional tolerance Deviation between diameter and effective length: ±2% Total length deviation: ±4% 2. Elastic deformation: Under 1.2 times of working pressure, the diameter

品質 3.3*6.5mの黒い浮遊保護波止場のドックの空気のゴム製 フェンダー 工場

3.3*6.5mの黒い浮遊保護波止場のドックの空気のゴム製 フェンダー

3.3*6.5m Black Floating Protective Wharf Dock Pneumatic Rubber Fender 1. Inflatable Rubber Fender Introduction The "Yokohama Type Inflatable Rubber Fender" was developed in 1958. Progress in the development of such floating inflatable rubber fenders is closely related to the progress and development of ship technology, and has to continuously cope with progressively larger oil tankers such as VLCC's, ULCC's, large gas carriers, bulk carriers and floating structures. Floating

品質 熱い電流を通す鎖が付いているSTS空気の横浜のゴム製 フェンダー 工場

熱い電流を通す鎖が付いているSTS空気の横浜のゴム製 フェンダー

STS Pneumatic Yokohama Rubber Fender With Hot Galvanizing Chain 1. Pneumatic Rubber Fender Introduction What is Pneumatic Rubber Fender? The "Yokohama Type Pneumatic Rubber Fender" was developed in 1958. Progress in the development of such floating pneumatic rubber fenders is closely related to the progress and development of ship technology, and has to continuously cope with progressively larger oil tankers such as VLCC's, ULCC's, large gas carriers, bulk carriers and